T700

THINKWARE CONNECTED
LTE

With 4G LTE technology on-board, the dash cam connects to your smartphone in real-time from anywhere. Simply insert an active nano size 4G SIM Card (not included) with SMS and internet data into the dash cam to gain access to the Advanced Connected Features. Australian Version compatible with Telstra, Optus and Vodafone 4G LTE Networks.

The NEW THINKWARE CONNECTED LTE mobile app offers a wide range of smart features. Now you can truly communicate with your vehicle in real-time seamlessly. One account on Thinkware Connected LTE can connect up to five dash cam devices.

THINKWARE CONNECTED LTE
Smartphone App*
*Compatible with Android (7.0 Nougat or higher) and iOS (11.4 or higher)

Real-Time Parking Impact Video

When an impact is detected in standard parking mode by the dash cam, receive a notification and play the 20 second Full-HD video (10 seconds before and after the incident) on your smartphone.

Remote Live View

Remotely view your dash cam in Continuous Recording Mode and Standard Parking Mode by clicking the Live View Button on the app home screen.
*Remote Live View can be requested up to 300 minutes a month.
**Remote Live View is unavailable in Energy Saving Mode when your vehicle is parked.

Captured Image of Parked Vehicle

In Parking Mode, check the location of your vehicle and its surroundings. View a Full-HD image of your front and rear camera including the location of your parked vehicle.

Emergency SOS Alert

A SOS message and video will be sent to your emergency contact in the event of a strong impact crash or when the driver presses the SOS button on the dash cam.

* Strong impact crash message includes a 20 seconds video (10 seconds before and after the incident) and location of the crash. SOS recording message includes a 10 seconds video (5 seconds before and after the incident) and location of the crash.

Vehicle Status and Driving History

Monitor your vehicle’s status to check whether your vehicle is parked or operating on the road.View your driving history including data such as date, time, distance, route and driving behavior. Check your vehicle battery voltage and remotely turn off the dash cam when the battery voltage is low.

Remote Firmware Data Update

Update your dash cam remotely to enhance your dash cam’s features, maintain optimal operation and increase stability. Firmware download can take up to several minutes and you will receive a push notification once the download is complete. Check the firmware download and reboot the dash cam to start firmware update.

 No new videos can be recorded while saving the 20 seconds of first impact file.

** If a second or third impact is detected, an additional push notification alert of the impact is sent to the user’s smartphone. And if those impacts are within 10 seconds from the first impact, it can be seen in the remaining seconds of the first impact file (e.g. If, a second impact is detected 2 seconds from the first impact, 8 seconds are the duration of the second impact video).

*** Strong impact videos are recorded for 20 seconds (10 second before and after the incident) at 30 frames per second. The videos are uploaded on to the server and your emergency contact will receive an SMS message including the impact details and video URL. The strong impact notification, strong impact video upload and transmission to emergency contact is an unlimited service.

**** The service behavior and the transmission may vary depending on the server environment and your mobile data.

Wi-Fi connectivity supports both 2.4GHz and 5GHz bands for the best experience in different environments.

2.4GHz has a longer range and can be captured from a farther distance. The longer range network also captures other devices thus preferred in undisrupted environments.

5GHz has a shorter range and can offer better performance with a higher bandwidth. The shorter range network avoids interferences thus preferred for a less congestive experience within shorter distances.

*Download speed and connection experience can differ according to smartphone specifications and telecommunications conditions.
**5GHz band may be more suitable for cities due to possible disruptions in telecommunications environments.

THINKWARE
DASH CAM LINK

*Compatible with Android (7.0 Nougat or higher) and iOS (11.4 or higher)

PLAY RECORDED VIDEOS AND MANAGE SETTINGS ON SMARTPHONE

The Thinkware Dash Cam T700 and your smartphone can be connected via
‘THINKWARE DASH CAM LINK’ app with built-in Wi-Fi.
Check live view screen, play recorded videos, and manage dash cam settings.

Using the GPS data can precisely pinpoint the vehicle’s location and routes with its driving speed on the map.The GPS helps you accurately assess the status of the accident by providing you with the vehicle speed,the direction of the collision and the severity of impact. The dash cam not only records driving footagebut can also be used to track and recall past driving routes whether it be work or holiday routes.

LDWS

Lane Departure Warning System

Designed for distracted or drowsey drivers, the dash cam will alert you as soon as it senses you’re vehicle leaving the lane while driving at a speed of over 50 kilometres per hour. LDWS alerts you when leaving your lane to help keep any road misfortunes from ruining your trip or compromising you and your passengers’ safety.

FCWS / uFCWS

High Speed / Urban Forward Collision Warning System

Keep a safe distance from the vehicle you’re following with the help of FCWS / uFCWS. Equipped with a state-of-the-art road safety warning system, it calculates the real-time distance between your vehicle and the automobile in front of you at a speed of over 30 kilometres per hour (km/h) (in expressways) and under 30 km/h in a busy, congested city. This dash cam issues a three-level early warning to the driver, depending on the danger of the possible collision.

FVDW

Front Vehicle Departure Warning

When stopped at an intersection or a traffic jam, this dash cam’s Front Vehicle Departure Warning (FVDW) intelligent guidance system lets you know when the vehicle in front of you has already started moving, helping you stay attentive each time.

This dash cam comes with various Safety Camera Alert functions aimed at helping drivers abide by traffic rules and regulations to avoid getting ticketed for an infraction. Through the built-in GPS, it lets a driver know about a designated average speed camera & mobile speed zones and notifies drivers of upcoming fixed red-light and speed cameras.

CMOS Image Sensors allow constant front and rearview 1080P Full HD resolution recording during both daytime and nighttime. The 140-degree front and 127-degree rear cam wide angle lens view will minimiseblind spots to assure recording of all events without fail.

The T700 is dual channel and is available as a pack with a Front and Rear Camera Included. The rear camera simply mounts on the inside of the rear window and is designed to capture an event at the back of the vehicle.

Wide Dynamic Range (WDR)

Whether you’re driving under bright sunlight, heading out of a tunnel or getting under the shadow of a tall building, among others, its WDR feature helps get you through a sudden change in frontal light exposure levels that yield excessively bright or dark recordings. WDR does this by getting rid of overly bright spots and correcting colour balance to produce nothing but clear images.

Super Night Vision 1.0

Using the latest Image Signal Processing (ISP) technology, the dash cam records videos up to 10 times brighter even in low-light environments like dark alleyways or underground parking lots during standard parking mode recordings.

Automatic Exposure

A sudden rise of light exposure brought about by intense sunlight or headlight beams from oncoming vehicles, or poor lighting in a tunnel may give any ordinary dash cam trouble capturing clear images but not THINKWARE dash cams. They come with an automatic light exposure function that controls light exposure levels for crisp footage at all times.

Continuous
Recording Mode

Automatically activates as soon as the engine starts, this function lets you record videos that are saved in one-minute segments via an auto-looping mechanism.

Event Recording
Mode

Active Impact Monitoring System, made possible by the built-in three-axis G-Sensor, automatically stores video data 10 seconds prior and after a collision.

Manual
Recording Mode

Similar to how a typical video camera works, you use this mode to record events in front of your vehicle, whether or not it’s in motion, as they happen.

Advanced Parking
Surveillance Mode

Paired with a genuine THINKWARE Hard Wire Cable kit (HWC), this can provide full surveillance capabilities whenever your vehicle is parked. It securely stores 20 seconds of footage (10 seconds before/after) once it detects motion or impact.

Audio / Voice
Recording

Not only does it capture vivid videos, but it also records crystal-clear audio. This enables you to enjoy top-tier comprehensive surveillance capabilities to the fullest, too.

ENERGY SAVE
PARK MODE

This feature significantly trims down your power consumption to up to 1/3 less, while giving you as much as 3x longer video recording capability. Serves you well when you’re on a vacation or you need to leave the vehicle unattended for quite some time, the Energy Save Parking Mode instantly puts the dash cam to sleep after capturing 20-second footage of an impact or motion detected by the G-Sensor.

TIME LAPSE
PARK MODE

Records at 2 frames per second, the Time Lapse Park Mode makes it possible to reduce the video files’ size; hence, this can capture videos from your parked vehicle up to 16 times longer than other dash cams can. This ensures important clips or images will stay safe in it’s memory for the long haul.

Like all THINKWARE dash cams, it has a built-in thermal sensor that protects it from getting hounded by the intense heat. Clad in a specially-designed heat discharge construction, the sensor automatically shuts it down to prevent overheating, allowing the dash cam to thrive even in the harshest Australian weather conditions.

The intuitive and simple-to-use interface allows you an easy and convenient viewing of your recorded videos. Through PC or Mac viewer, you can playback and download recorded videos along with your route history and speed record. You can also change the dash cam settings, format the memory card, or install updates with just a few clicks on the viewer.