F70PRO

Equipped with CMOS Image Sensor, this lets you record crisp and clear full 1080p HD videos be it daytime or nighttime. Even better, it sports a 140-degree wide angle lens view that minimises blind spots across the board.

Wide Dynamic Range (WDR)

Whether you’re driving under bright sunlight, heading out of a tunnel or getting under the shadow of a tall building, among others, its WDR feature helps get you through a sudden change in frontal light exposure levels that yield excessively bright or dark recordings. WDR does this by getting rid of overly bright spots and correcting colour balance to produce nothing but clear images.

Nighttime Picture Quality Correction

Images from videos recorded at nighttime on poorly-lit avenues, streets or roads generally don’t look that lucid. But with this, it’s an entirely different story. It’s armed with enhancement sensors that make brightness, colour and noise cancellation controls possible each time; hence, vivid video recordings of your evening drive.

Automatic Exposure

A sudden rise of light exposure brought about by intense sunlight or headlight beams from oncoming vehicles, or poor lighting in a tunnel may give any ordinary dash cam trouble capturing clear images but not THINKWARE dash cams. They come with an automatic light exposure function that controls light exposure levels for crisp footage at all times.

Using the latest Image Signal Processing (ISP) technology, which brings real-time image processing to the table, this captures images and records videos of up to 10 times brighter even in low-light environments like dark alleyways or underground parking lots for peace of mind. Super Night Vision 1.0 is only enabled during parking mode.

Continuous
Recording Mode

Automatically activates as soon as the engine starts, this function lets you record videos that are saved in one-minute segments via an auto-looping mechanism.

Event Recording
Mode

Active Impact Monitoring System, made possible by the built-in three-axis G-Sensor, automatically stores video data 10 seconds prior and after a collision.

Manual
Recording Mode

Similar to how a typical video camera works, you use this mode to record events in front of your vehicle, whether or not it’s in motion, as they happen.

Advanced Parking
Surveillance Mode

Paired with a genuine THINKWARE Hard Wire Cable kit (HWC), this can provide full surveillance capabilities whenever your vehicle is parked. It securely stores 20 seconds of footage (10 seconds before/after) once it detects motion or impact.

Audio / Voice
Recording

Not only does it capture vivid videos, but it also records crystal-clear audio. This enables you to enjoy top-tier comprehensive surveillance capabilities to the fullest, too.

Built-in Bluetooth allows hassle-free dash cam pairing with your compatible Android or iOS device via the Thinkware Dash Cam Link App.
Once paired, replay your latest driving videos and manage your dash cam’s settings with the Thinkware Dash Cam Link App.

THINKWARE DASHCAM LINK
U3000, Q1000, F790, F800, F200 PRO, F200, F70PRO and FA200

With hardwiring installation, enjoy parking protection against potential mishaps and hit-and-runs by capturing footage when an impact or motion is detected (hardwiring cable or OBD-II cable required).
You can tailor the F70PRO’s Parking Surveillance mode to the coverage that best fits your surveillance needs by choosing from Impact/Motion Detection, Time Lapse, or Energy Saving parking modes.

Impact and Motion Detection
With Impact and Motion Detection turned on, any potential vandalism attempts and hit-and-run drivers while the car is parked will be caught in the act. In Parking mode, Impact detection captures any impact to the vehicle while Motion Detection captures any movement around the vehicle.

Time Lapse
Time Lapse in Parking mode records footage at 2fps, enabling the dash cam to continuously record long periods of parking surveillance without increasing power consumption.

Energy Saving 2.0
Energy Saving 2.0 in Parking Surveillance mode records footage triggered by impacts only, allowing the dash cam to reduce its power consumption and remain in Parking mode for a longer duration.

This safety feature prevents heat-related damage by automatically switching the F70PRO to a low-power mode if the temperature inside the vehicle gets too high during Parking mode.
In this state, the dash cam records incidents triggered by impacts only until its operating temperature is safe again to resume Motion Detection or Timelapse Parking mode.

By adding in a genuine THINKWARE Dash Cam GPS Antenna (GPSANT) to the mix, this can help you keep track of the vehicle’s driving speed and precise location while identifying ideal routes on the map. The GPS also lets you accurately assess the details of the surrounding area and track your holiday routes for faster travels. In case of a road mishap, it supplies accurate readings of vehicle speed, time of the collision and the impact severity.

*GPSANT required, sold separately

This comes with various Safety Camera Alert functions aimed at helping drivers abide by traffic rules and regulations to avoid getting ticketed for an infraction. Through the GPSANT add-on, it lets a driver know about a designated average speed zones in a specific area, as it notifies whenever a red light or speed camera is nearby, as well.

*GPSANT required, sold separately

Like all THINKWARE dash cams, it has a built-in thermal sensor that protects it from getting hounded by the intense heat. Clad in a specially-designed heat discharge construction, the sensor automatically shuts it down to prevent overheating, allowing the dash cam to thrive even in the harshest Australian weather conditions.

In case the power gets disconnected after an accident, the super capacitor-powered Fail-Safe Recording mode kicks in to ensure the safe and uninterrupted storage of any recording in progress at the time of the collision. Rest assured, these valuable files will be securely stored and stay accessible under any circumstances.

Like all THINKWARE dash cams, it has a built-in thermal sensor that protects it from getting hounded by the intense heat. Clad in a specially-designed heat discharge construction, the sensor automatically shuts it down to prevent overheating, allowing the dash cam to thrive even in the harshest Australian weather conditions.

In case the power gets disconnected after an accident, the super capacitor-powered Fail-Safe Recording mode kicks in to ensure the safe and uninterrupted storage of any recording in progress at the time of the collision. Rest assured, these valuable files will be securely stored and stay accessible under any circumstances.

The intuitive and simple-to-use interface of THINKWARE DASH CAM allows you an easy and convenient viewing of your recorded videos. Through PC or Mac viewer, you can playback and download recorded videos along with your route history and speed record. You can also change the dash cam settings, format the memory card, or install updates with just a few clicks on the viewer.